How To Use Electric Air Pump Travel Is Not Afraid Of Tire Problems!

1. The use method of electric air pump is as follows: idling: open three condensate switches, turn on the power switch, about 3 minutes, turn off the condensate switch.
2, the ultimate safety valve check: turn on the power, turn off the condensate switch and the regulator switch, observe the value of the pressure gauge, when the pressure reaches 330 bar, check whether the safety valve is unloaded, if not, immediately stop for replacement, if normal, turn off the power, open the condensate switch to release the condensate water, the regulator port facing the ground, unscrew the switch to remove the residual gas inside. It is specially emphasized that the regulating valve port shall not be to people when unloading, so as to avoid unnecessary injury.
3. Inflation: Connect the inflation bottle, first open the regulating valve switch, and then open the cylinder valve to the maximum. Then turn on the power switch, observe the pressure gauge changes, when it reaches 300 bar, turn off the power, and then turn off the regulating valve, remember that the order cannot be reversed. The condensate should be discharged every 15 minutes during the inflation process. Finally, the condensate should be discharged and the air in the pipe should be removed. Be careful in the operation and remember that the outlet should face the ground when the gas is discharged.
4. Tidy up the machine and wait for 10 minutes before continuing to inflate.