What are the usage methods for car mounted inflation pumps

The working principle of an air pump is that the engine drives the crankshaft of the air pump through two triangular belts, which in turn drive the piston to inject air. The injected gas is then directed into the air storage cylinder through the air duct. On the other hand, the gas reservoir is guided into the pressure regulating valve fixed on the air pump through a gas guide pipe, thereby controlling the air pressure inside the reservoir.

The usage method of the car mounted inflation pump mainly includes the following steps:

Power supply: The car mounted inflation pump can be powered in two ways, namely through the 12V cigarette lighter interface and through the battery.

Connect the air nozzle: Unscrew the tire air nozzle cover and connect the inflation pipe of the inflation pump to it.

Set inflation pressure: After the inflation pump is successfully powered on and connected to the air nozzle, the inflation pressure can be set on the settings panel.

Start inflation: When everything is ready, press the inflation start button.

Usage precautions: When using the car mounted inflation pump, be sure to use it after starting the vehicle. If it is turned on during startup, it will feed the battery and cause damage to the car's battery. The car inflation pump inflates slowly due to its low power, and many car owners use it for a long time, which can easily cause damage to the pump due to overheating. The correct approach is to stop the pump after a few minutes of use and let it cool down appropriately.